Construction Site Safety Rules


Welcome To HSE STUDY GUIDE


In this article we are going to know about Construction Site Safety Rules.


There are some safety rules inside any organization, which it is mandatory for everyone to follow. To avoid dangers, following safety related rules is the most appropriate and effective way.



That's why a security consultant is kept inside any organization, who along with the working workers keeps the visitor informed that what kind of rules related to safety they have to follow at the work place.


Construction site safety rules depend on the potential hazards assessed at the work site and accordingly directed to the safety of employees at the work site.


It is the responsibility of any employer to formulate and implement construction site safety rules for the safety of the employees working in his organization and to assess the safety rules implemented from time to time that they are effective. Or not.


In the event of not being effective, he should sit again with the management, make the rule and discuss it and order to remove all those factors causing disruption in security.


Construction Site Safety Rules which are as follows:


1. Always wear PPE

It is the responsibility of the employees working inside any organization that they should not forget to wear the personal protective equipment prescribed at the workplace.


Because it acts as a barrier between the accident and the employee. Some PPE's are mandatory and wearing them before going inside the company or on the site comes in the category of prominence.


Therefore, it should always be worn during work and while on the working site because at any time the potential danger can turn into danger.



2. Get Your Induction

Any organization gives induction to its employees who are new, so when safety induction is being given, take it and do not be careless anywhere.


Because during Safety Induction, all the rules related to the safety of the company are told that the employees have to follow. During this, all those emergency services inside the company are told which are used in emergency.


3. Be Tidy

Fully cooperate in making your workplace clean and hygienic. If full care is taken of housekeeping at the workplace, then hazards like slip, trip can be prevented. Apart from this, if hot work (welding, gas cutting, grinding) etc. is being done at work place and there is clean- If there is a lack of cleanliness, then there is every possibility of fire in that place.


So for your safety and to create a safe environment, show readiness and follow all the rules that have been made to keep the organization clean.


4. Act Safe

Any construction site is a very dangerous place, if we show even a little carelessness during the work, it can prove to be fatal or can cause serious danger. Therefore, when the work is being conducted, do or ask to do a safe activity.


And if someone is not following the safe procedure, then the punishment that has been prescribed by the company for doing an unsafe act, without hesitation, punish that person, so that the message is sent to other workers, if he also commits an unsafe act. If caught, he may also face punishment.



5. Follow Signs

To avoid dangers on the construction site, there is a safety sign placed everywhere, which keeps on reminding the visitor and the employees to follow the rules of safety. Therefore, before doing work, we check the risk assessment and what is the procedure of work.


Therefore, to avoid hazards at the workplace, check what is the control measure before starting the work and follow those safety signs which have been put or pasted at the workplace for safety awareness.


6. Do not Enter

There are many such places on the construction site where entry is prohibited, so never enter such a place. Because a person going to such places can be in the grip of potential dangers at any time, because he is ignorant of the dangers.


Never enter the place where barricading is placed in the midst of taking the shortcut. Also do not enter unsupported trenches and never work or go to heights without fall protection.


When the load is hanging on the crane, never go under them i.e. do not go under them to go to the other end, it is completely unsafe and prohibited.


7. Report

If you are noticing any potential danger at the workplace, it should be reported without delay. Action will be taken only after reporting and possible hazards will be removed.


If the workers are seeing any danger, then they should inform the site supervisor available at the workplace, so that they can take further action to remove it.



8. Don't Tamper

Whatever scaffolding or guard rails are installed at the work site, it should not be pierced. Never remove the guard rail during work. If there is any component damage, do not use it, immediately inform it to the competent person.


Do not repair any equipment without any permission, that is, do not tamper with the equipment in any way, otherwise the possibility of getting caught cannot be ruled out.


9. Use the Right Equipment

Use only the suitable equipment that has been given for the conduct of any work. Before using it, check that equipment thoroughly to see if it damages. At the work place, bring more portable equipment for work, which is being operated on 110 V electrical power.


10. If in Doubt, Ask

If there is any doubt during the operation of any machine, then without any delay ask the supervisor available on the site without hesitation. Apart from this, if there is doubt in doing any work safely, then it should also be properly understood about how it can be operated safely.


I hope by this article you got to know about Construction Site Safety Rules.


If you have any suggestions regarding this article you can comment below.


Regards,

HSE STUDY GUIDE